-15%

1hp Ingco Centrifugal Water Pump (JP07508)


Highlight

  • Voltage:220-240V~50Hz
  • Rated power:750W(1HP)
  • Max.head:51m Max.flow:55L/min
  • Warranty:5Years(Comprehensive Warranty for the 1st Year and Service Warranty for the Next 4 Years)

Rs.54,700.00 Rs.64,500.00

Ingco JP07508 Centrifugal Water Pump Specification

  • Self-priming Jet Pump
  • Voltage:220-240V~50Hz
  • Rated power:750W(1.0HP)
  • Max.head:51m
  • Max.flow:55L/min
  • Max.suction:9m
  • Pipe diameter:1″x1″
  • Copper wire motor
  • Stainless steel impeller
  • 0.3m length cable
  • Packed by carton box
  • 5Years Warranty (Comprehensive Warranty for the 1st Year and Service Warranty for the Next 4 Years)

A centrifugal pump is a mechanical device designed to move a fluid by means of the transfer of rotational energy from one or more driven rotors, called impellers.  Fluid enters the rapidly rotating impeller along its axis and is cast out by centrifugal force along its circumference through the impeller’s vane tips.  The action of the impeller increases the fluid’s velocity and pressure and also directs it towards the pump outlet.  The pump casing is specially designed to constrict the fluid from the pump inlet, direct it into the impeller and then slow and control the fluid before discharge.

There are two main families of pumps: centrifugal and positive displacement pumps.  In comparison to the latter, centrifugal pumps are usually specified for higher flows and for pumping lower viscosity liquids, down to 0.1 cP.  In some chemical plants, 90% of the pumps in use will be centrifugal pumps.  However, there are a number of applications for which positive displacement pumps are preferred.

Centrifugal pump designs offer simple and low cost solutions to most low pressure, high capacity pumping applications involving low viscosity fluids such as water, solvents, chemicals and light oils.  Typical applications involve water supply and circulation, irrigation, and the transfer of chemicals in petrochemical plants.  Positive displacement pumps are preferred for applications involving highly viscous fluids such as thick oils and slurries, especially at high pressures, for complex feeds such as emulsions, foodstuffs or biological fluids, and when accurate dosing is required.

 

For more information visit Ingco!

Shop for similar products now!

For exclusive offer subscribe us on facebook!

SKU: JP07508 Category:
Weight 13 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “1hp Ingco Centrifugal Water Pump (JP07508)”

There are no reviews yet.